Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Karta microSD
#1
hey mam problem z karta micro sd, bylo to tak ze pewnego slonecznego dnia, przestala dzialac i w sumie tyle wiem, zalezy mi na plikach nie na karcie, testdisk na windowsie jej nie wykrywa, menadzer rowniez nie, gparted rowniez jak i fdisk -l

log z dmesg

[    0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.0.0-kali1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.0.4-1+kali2 (2015-06-03)
[    0.000000] Command line: BOOT_IMAGE=/live/vmlinuz boot=live noconfig=sudo username=root hostname=kali persistence initrd=/live/initrd.img
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000955affff] usable
[    0.000000] BIOS-e820: [mem 0x00000000955b0000-0x0000000095eaffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000095eb0000-0x000000009aabefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009aabf000-0x000000009aebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Acer Aspire E5-572G/EA50_HWS  , BIOS V1.02 08/01/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 009B000000 mask 7FFF000000 uncachable
[    0.000000]   2 base 009C000000 mask 7FFC000000 uncachable
[    0.000000]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: update [mem 0x9b000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b12000, 0x01b12fff] PGTABLE
[    0.000000] BRK [0x01b13000, 0x01b13fff] PGTABLE
[    0.000000] BRK [0x01b14000, 0x01b14fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
[    0.000000]  [mem 0x15f400000-0x15f5fffff] page 2M
[    0.000000] BRK [0x01b15000, 0x01b15fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x140000000-0x15f3fffff]
[    0.000000]  [mem 0x140000000-0x15f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x120000000-0x13fffffff]
[    0.000000]  [mem 0x120000000-0x13fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0x955affff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0x953fffff] page 2M
[    0.000000]  [mem 0x95400000-0x955affff] page 4k
[    0.000000] init_memory_mapping: [mem 0x95eb0000-0x9aabefff]
[    0.000000]  [mem 0x95eb0000-0x95ffffff] page 4k
[    0.000000]  [mem 0x96000000-0x9a9fffff] page 2M
[    0.000000]  [mem 0x9aa00000-0x9aabefff] page 4k
[    0.000000] BRK [0x01b16000, 0x01b16fff] PGTABLE
[    0.000000] BRK [0x01b17000, 0x01b17fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
[    0.000000]  [mem 0x9afff000-0x9affffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[    0.000000]  [mem 0x100000000-0x11fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x7dee5000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x000000009AFFE210 0000A4 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009AFF8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 0x000000009AFE7000 00DDF9 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FACS 0x000000009AFB9000 000040
[    0.000000] ACPI: UEFI 0x000000009AFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: FPDT 0x000000009AFFB000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASF! 0x000000009AFF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 0x000000009AFF7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: APIC 0x000000009AFF6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 0x000000009AFF5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009AFE4000 002028 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: BOOT 0x000000009AFE2000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: LPIT 0x000000009AFE1000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: ASPT 0x000000009AFDF000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DBGP 0x000000009AFDE000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009AFDD000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009AFDC000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009AFD8000 003B8C (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009AFD3000 00375A (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x15f5f9000-0x15f5fcfff]
[    0.000000]  [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ac00000-ffff88015ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000015f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000955affff]
[    0.000000]   node   0: [mem 0x0000000095eb0000-0x000000009aabefff]
[    0.000000]   node   0: [mem 0x000000009afff000-0x000000009affffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000015f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000015f5fffff]
[    0.000000] On node 0 totalpages: 1021788
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9799 pages used for memmap
[    0.000000]   DMA32 zone: 627136 pages, LIFO batch:31
[    0.000000]   Normal zone: 6104 pages used for memmap
[    0.000000]   Normal zone: 390656 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x9ba00000-0x9f9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x955b0000-0x95eaffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9aabf000-0x9aebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff88015f200000 s87256 r8192 d31528 u262144
[    0.000000] pcpu-alloc: s87256 r8192 d31528 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1005800
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/live/vmlinuz boot=live noconfig=sudo username=root hostname=kali persistence initrd=/live/initrd.img
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3908948K/4087152K available (5580K kernel code, 1025K rwdata, 1944K rodata, 1248K init, 832K bss, 178204K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.434 MHz processor
[    0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.86 BogoMIPS (lpj=9577736)
[    0.000150] pid_max: default: 32768 minimum: 301
[    0.000214] ACPI: Core revision 20150204
[    0.012855] ACPI: All ACPI Tables successfully acquired
[    0.021100] Security Framework initialized
[    0.021167] AppArmor: AppArmor disabled by boot time parameter
[    0.021229] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.021520] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.022455] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.022926] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.022994] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.023277] Initializing cgroup subsys blkio
[    0.023338] Initializing cgroup subsys memory
[    0.023401] Initializing cgroup subsys devices
[    0.023462] Initializing cgroup subsys freezer
[    0.023523] Initializing cgroup subsys net_cls
[    0.023584] Initializing cgroup subsys perf_event
[    0.023646] Initializing cgroup subsys net_prio
[    0.023728] CPU: Physical Processor ID: 0
[    0.023787] CPU: Processor Core ID: 0
[    0.023850] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.023913] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024869] mce: CPU supports 7 MCE banks
[    0.024939] CPU0: Thermal monitoring enabled (TM1)
[    0.025006] process: using mwait in idle threads
[    0.025067] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.025131] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.025287] Freeing SMP alternatives memory: 24K (ffffffff81a3a000 - ffffffff81a40000)
[    0.026291] ftrace: allocating 22431 entries in 88 pages
[    0.034800] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.074582] TSC deadline timer enabled
[    0.074585] smpboot: CPU0: Intel(R) Core(TM) i3-4000M CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
[    0.074803] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.075092] ... version:                3
[    0.075151] ... bit width:              48
[    0.075211] ... generic registers:      4
[    0.075270] ... value mask:             0000ffffffffffff
[    0.075332] ... max period:             0000ffffffffffff
[    0.075393] ... fixed-purpose events:   3
[    0.076323] ... event mask:             000000070000000f
[    0.076934] x86: Booting SMP configuration:
[    0.076995] .... node  #0, CPUs:      #1
[    0.091328] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.091541]  #2
[    0.103760] CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
[    0.106993]  #3
[    0.121198] x86: Booted up 1 node, 4 CPUs
[    0.121261] smpboot: Total of 4 processors activated (19155.47 BogoMIPS)
[    0.124706] devtmpfs: initialized
[    0.126637] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[    0.126891] pinctrl core: initialized pinctrl subsystem
[    0.127080] NET: Registered protocol family 16
[    0.137239] cpuidle: using governor ladder
[    0.148602] cpuidle: using governor menu
[    0.148704] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.148785] ACPI: bus type PCI registered
[    0.148846] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.148981] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.149068] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.149396] PCI: Using configuration type 1 for base access
[    0.161600] ACPI: Added _OSI(Module Device)
[    0.161662] ACPI: Added _OSI(Processor Device)
[    0.161723] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.161785] ACPI: Added _OSI(Processor Aggregator Device)
[    0.165045] ACPI: Executed 1 blocks of module-level executable AML code
[    0.168200] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.169493] ACPI: Dynamic OEM Table Load:
[    0.169631] ACPI: SSDT 0xFFFF880159F5A000 000465 (v01 PmRef  Cpu0Cst  00003001 INTL 20131115)
[    0.170405] ACPI: Dynamic OEM Table Load:
[    0.170545] ACPI: SSDT 0xFFFF88015A89B800 0005AA (v01 PmRef  ApIst    00003000 INTL 20131115)
[    0.171369] ACPI: Dynamic OEM Table Load:
[    0.171507] ACPI: SSDT 0xFFFF880159F42200 000119 (v01 PmRef  ApCst    00003000 INTL 20131115)
[    0.209382] ACPI: Interpreter enabled
[    0.209448] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[    0.209609] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[    0.209781] ACPI: (supports S0 S3 S4 S5)
[    0.209838] ACPI: Using IOAPIC for interrupt routing
[    0.209923] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.242269] ACPI: Power Resource [PG00] (on)
[    0.247486] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.247553] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    2.360814] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    2.361369] PCI host bridge to bus 0000:00
[    2.361429] pci_bus 0000:00: root bus resource [bus 00-fe]
[    2.361490] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    2.361556] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    2.361621] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    2.361700] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[    2.361785] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    2.361920] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    2.361954] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    2.362049] pci 0000:00:01.0: System wakeup disabled by ACPI
[    2.362150] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    2.362160] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit]
[    2.362166] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    2.362170] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    2.362298] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    2.362305] pci 0000:00:03.0: reg 0x10: [mem 0xd1610000-0xd1613fff 64bit]
[    2.362457] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    2.362475] pci 0000:00:14.0: reg 0x10: [mem 0xd1600000-0xd160ffff 64bit]
[    2.362534] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    2.362620] pci 0000:00:14.0: System wakeup disabled by ACPI
[    2.362720] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    2.362739] pci 0000:00:16.0: reg 0x10: [mem 0xd1618000-0xd161800f 64bit]
[    2.362801] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    2.362930] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    2.362945] pci 0000:00:1b.0: reg 0x10: [mem 0xd1614000-0xd1617fff 64bit]
[    2.363011] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    2.363100] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    2.363294] pci 0000:00:1c.0: [8086:8c14] type 01 class 0x060400
[    2.363361] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    2.363451] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    2.363550] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    2.363615] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    2.363746] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    2.363950] pci 0000:00:1d.0: reg 0x10: [mem 0xd161c000-0xd161c3ff]
[    2.365151] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    2.365279] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    2.365493] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    2.365508] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    2.365515] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    2.365523] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    2.365530] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    2.365537] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    2.365544] pci 0000:00:1f.2: reg 0x24: [mem 0xd161b000-0xd161b7ff]
[    2.365581] pci 0000:00:1f.2: PME# supported from D3hot
[    2.365698] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    2.365712] pci 0000:00:1f.3: reg 0x10: [mem 0xd1619000-0xd16190ff 64bit]
[    2.365731] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    2.365902] pci 0000:01:00.0: [10de:1341] type 00 class 0x030200
[    2.365914] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
[    2.365925] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[    2.365936] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[    2.365944] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    2.365951] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    2.366001] pci 0000:01:00.0: System wakeup disabled by ACPI
[    2.372770] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    2.372833] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    2.372835] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd0ffffff]
[    2.372838] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    2.372916] pci 0000:07:00.0: [10ec:5287] type 00 class 0xff0000
[    2.372935] pci 0000:07:00.0: reg 0x10: [mem 0xd1505000-0xd1505fff]
[    2.372998] pci 0000:07:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    2.373084] pci 0000:07:00.0: supports D1 D2
[    2.373086] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[    2.373120] pci 0000:07:00.0: System wakeup disabled by ACPI
[    2.373226] pci 0000:07:00.1: [10ec:8168] type 00 class 0x020000
[    2.373245] pci 0000:07:00.1: reg 0x10: [io  0x3000-0x30ff]
[    2.373272] pci 0000:07:00.1: reg 0x18: [mem 0xd1504000-0xd1504fff 64bit]
[    2.373290] pci 0000:07:00.1: reg 0x20: [mem 0xd1500000-0xd1503fff 64bit]
[    2.373381] pci 0000:07:00.1: supports D1 D2
[    2.373382] pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    2.384795] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    2.384858] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    2.384861] pci 0000:00:1c.0:   bridge window [mem 0xd1500000-0xd15fffff]
[    2.384954] pci 0000:08:00.0: [14e4:4365] type 00 class 0x028000
[    2.384979] pci 0000:08:00.0: reg 0x10: [mem 0xd1400000-0xd1407fff 64bit]
[    2.385123] pci 0000:08:00.0: supports D1 D2
[    2.385124] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    2.392821] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    2.392885] pci 0000:00:1c.3:   bridge window [mem 0xd1400000-0xd14fffff]
[    2.392912] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    2.397232] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    2.397780] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    2.398378] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    2.398886] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    2.399394] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    2.399992] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    2.400590] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    2.401102] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    2.401761] ACPI: Enabled 6 GPEs in block 00 to 3F
[    2.401924] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    2.402073] vgaarb: setting as boot device: PCI:0000:00:02.0
[    2.402137] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    2.402219] vgaarb: loaded
[    2.402276] vgaarb: bridge control possible 0000:00:02.0
[    2.402422] PCI: Using ACPI for IRQ routing
[    2.407979] PCI: pci_cache_line_size set to 64 bytes
[    2.408020] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    2.408022] e820: reserve RAM buffer [mem 0x955b0000-0x97ffffff]
[    2.408023] e820: reserve RAM buffer [mem 0x9aabf000-0x9bffffff]
[    2.408024] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[    2.408025] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
[    2.408153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    2.408552] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    2.410636] Switched to clocksource hpet
[    2.415211] pnp: PnP ACPI init
[    2.415417] system 00:00: [io  0x0680-0x069f] has been reserved
[    2.415481] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    2.415545] system 00:00: [io  0xffff] has been reserved
[    2.415607] system 00:00: [io  0xffff] has been reserved
[    2.415669] system 00:00: [io  0xffff] has been reserved
[    2.415731] system 00:00: [io  0x1800-0x18fe] could not be reserved
[    2.415795] system 00:00: [io  0x164e-0x164f] has been reserved
[    2.415861] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.415901] system 00:01: [io  0x0800-0x087f] has been reserved
[    2.415964] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.415992] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    2.416032] system 00:03: [io  0x1854-0x1857] has been reserved
[    2.416097] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    2.416123] pnp 00:04: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    2.418796] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    2.418863] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    2.418927] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    2.418992] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    2.419056] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    2.419120] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    2.419186] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    2.419250] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[    2.419314] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[    2.419380] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    2.419444] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
[    2.419509] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[    2.419574] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.420062] pnp: PnP ACPI: found 6 devices
[    2.426347] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    2.426434] pci 0000:07:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    2.426541] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[    2.426621] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    2.426689] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    2.426753] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd0ffffff]
[    2.426820] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    2.426903] pci 0000:07:00.0: BAR 6: assigned [mem 0xd1510000-0xd151ffff pref]
[    2.426983] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    2.427045] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    2.427111] pci 0000:00:1c.0:   bridge window [mem 0xd1500000-0xd15fffff]
[    2.427180] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    2.427245] pci 0000:00:1c.3:   bridge window [mem 0xd1400000-0xd14fffff]
[    2.427317] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    2.427318] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    2.427320] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    2.427321] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[    2.427322] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    2.427324] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff]
[    2.427325] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[    2.427326] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
[    2.427328] pci_bus 0000:07: resource 1 [mem 0xd1500000-0xd15fffff]
[    2.427329] pci_bus 0000:08: resource 1 [mem 0xd1400000-0xd14fffff]
[    2.427384] NET: Registered protocol family 2
[    2.427614] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    2.427765] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    2.427919] TCP: Hash tables configured (established 32768 bind 32768)
[    2.427997] TCP: reno registered
[    2.428059] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    2.428136] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    2.428256] NET: Registered protocol family 1
[    2.428330] pci 0000:00:02.0: Video device with shadowed ROM
[    2.442775] PCI: CLS 64 bytes, default 64
[    2.442814] Unpacking initramfs...
[    2.951050] Freeing initrd memory: 33900K (ffff88007dee5000 - ffff880080000000)
[    2.951152] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.951218] software IO TLB [mem 0x96abf000-0x9aabf000] (64MB) mapped at [ffff880096abf000-ffff88009aabefff]
[    2.951332] Simple Boot Flag at 0x44 set to 0x1
[    2.951550] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    2.951686] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x1c
[    2.951756] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x1c
[    2.951824] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x1c
[    2.951892] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x1c
[    2.952009] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.952390] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    2.952503] audit: initializing netlink subsys (disabled)
[    2.952580] audit: type=2000 audit(1471871112.832:1): initialized
[    2.952919] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.953000] zpool: loaded
[    2.953189] VFS: Disk quotas dquot_6.5.2
[    2.953263] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.953678] alg: No test for stdrng (krng)
[    2.953765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.953878] io scheduler noop registered
[    2.953939] io scheduler deadline registered
[    2.954010] io scheduler cfq registered (default)
[    2.954565] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    2.954631] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    2.954697] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    2.954713] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    2.954779] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[    2.954843] pci 0000:07:00.1: Signaling PME through PCIe PME interrupt
[    2.954910] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    2.954925] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    2.954989] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[    2.955898] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    2.955905] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.955980] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.956064] intel_idle: MWAIT substates: 0x42120
[    2.956065] intel_idle: v0.4 model 0x3C
[    2.956066] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.956247] GHES: HEST is not enabled!
[    2.956361] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.956803] Linux agpgart interface v0.103
[    2.956908] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.956971] AMD IOMMUv2 functionality not available on this system
[    2.957093] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[    2.957158] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.963395] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.963556] mousedev: PS/2 mouse device common for all mice
[    2.963648] rtc_cmos 00:02: RTC can wake from S4
[    2.963829] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.963918] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.964008] Intel P-state driver initializing.
[    2.964210] ledtrig-cpu: registered to indicate activity on CPUs
[    2.964864] TCP: cubic registered
[    2.965035] NET: Registered protocol family 10
[    2.965604] mip6: Mobile IPv6
[    2.965695] NET: Registered protocol family 17
[    2.965814] mpls_gso: MPLS GSO support
[    2.966698] registered taskstats version 1
[    2.968121] rtc_cmos 00:02: setting system clock to 2016-08-22 13:05:15 UTC (1471871115)
[    2.968413] PM: Hibernation image not present or could not be loaded.
[    2.969077] Freeing unused kernel memory: 1248K (ffffffff81902000 - ffffffff81a3a000)
[    2.969211] Write protecting the kernel read-only data: 8192k
[    2.969894] Freeing unused kernel memory: 552K (ffff880001576000 - ffff880001600000)
[    2.970182] Freeing unused kernel memory: 104K (ffff8800017e6000 - ffff880001800000)
[    2.974516] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.004250] systemd-udevd[76]: starting version 215
[    3.004539] random: systemd-udevd urandom read with 3 bits of entropy available
[    3.017253] ACPI: bus type USB registered
[    3.017334] usbcore: registered new interface driver usbfs
[    3.017403] usbcore: registered new interface driver hub
[    3.017486] usbcore: registered new device driver usb
[    3.018320] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.018387] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.018546] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    3.018636] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.018754] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.018829] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.018923] usb usb1: Product: xHCI Host Controller
[    3.018993] usb usb1: Manufacturer: Linux 4.0.0-kali1-amd64 xhci-hcd
[    3.019068] usb usb1: SerialNumber: 0000:00:14.0
[    3.020118] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.020253] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 28
[    3.020405] ehci-pci: EHCI PCI platform driver
[    3.020663] hub 1-0:1.0: USB hub found
[    3.020758] hub 1-0:1.0: 14 ports detected
[    3.021442] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.021522] r8169 0000:07:00.1: can't disable ASPM; OS doesn't have ASPM control
[    3.022083] SCSI subsystem initialized
[    3.023582] libata version 3.00 loaded.
[    3.026176] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.026252] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.026388] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    3.026459] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.026552] usb usb2: Product: xHCI Host Controller
[    3.026620] usb usb2: Manufacturer: Linux 4.0.0-kali1-amd64 xhci-hcd
[    3.026689] usb usb2: SerialNumber: 0000:00:14.0
[    3.027056] hub 2-0:1.0: USB hub found
[    3.028125] r8169 0000:07:00.1 eth0: RTL8411 at 0xffffc9000067a000, f0:76:1c:36:b5:62, XID 1c800800 IRQ 29
[    3.028219] r8169 0000:07:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.028650] hub 2-0:1.0: 4 ports detected
[    3.030962] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.031048] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    3.031182] ehci-pci 0000:00:1d.0: debug port 2
[    3.035155] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    3.035172] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd161c000
[    3.047187] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.047291] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.047356] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.047435] usb usb3: Product: EHCI Host Controller
[    3.047497] usb usb3: Manufacturer: Linux 4.0.0-kali1-amd64 ehci_hcd
[    3.047560] usb usb3: SerialNumber: 0000:00:1d.0
[    3.047732] hub 3-0:1.0: USB hub found
[    3.047794] hub 3-0:1.0: 2 ports detected
[    3.047988] ahci 0000:00:1f.2: version 3.0
[    3.048148] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    3.048232] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[    3.048322] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[    3.055752] scsi host0: ahci
[    3.055917] scsi host1: ahci
[    3.056070] scsi host2: ahci
[    3.056226] scsi host3: ahci
[    3.056374] scsi host4: ahci
[    3.056471] ata1: DUMMY
[    3.056531] ata2: DUMMY
[    3.056588] ata3: SATA max UDMA/133 abar m2048@0xd161b000 port 0xd161b200 irq 30
[    3.056668] ata4: DUMMY
[    3.056726] ata5: SATA max UDMA/133 abar m2048@0xd161b000 port 0xd161b300 irq 30
[    3.335480] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.359496] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    3.375507] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.376698] ata3.00: ATA-9: TS128GSSD370S, N1126KB, max UDMA/133
[    3.376773] ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    3.377532] ata3.00: configured for UDMA/133
[    3.377779] scsi 2:0:0:0: Direct-Access     ATA      TS128GSSD370S    6KB  PQ: 0 ANSI: 5
[    3.469023] usb 1-1: New USB device found, idVendor=13fe, idProduct=4100
[    3.469092] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.469157] usb 1-1: Product: USB DISK 2.0
[    3.469217] usb 1-1: Manufacturer:         
[    3.469276] usb 1-1: SerialNumber: 070B2B31946EC317
[    3.470667] usb-storage 1-1:1.0: USB Mass Storage device detected
[    3.470837] scsi host5: usb-storage 1-1:1.0
[    3.470959] usbcore: registered new interface driver usb-storage
[    3.471285] usbcore: registered new interface driver uas
[    3.491941] usb 3-1: New USB device found, idVendor=8087, idProduct=8000
[    3.492005] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.492334] hub 3-1:1.0: USB hub found
[    3.492566] hub 3-1:1.0: 8 ports detected
[    3.635708] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[    3.695743] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.696491] ata5.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
[    3.696560] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.697360] ata5.00: configured for UDMA/133
[    3.697588] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
[    3.699535] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.699635] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[    3.699740] sd 2:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    3.699773] sd 4:0:0:0: [sdb] Write Protect is off
[    3.699775] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.699808] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.700086] sd 2:0:0:0: [sda] Write Protect is off
[    3.700131] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    3.700196] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    3.700309] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.700349] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.701778]  sda: sda1
[    3.702078] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.768743]  sdb: sdb1 sdb2 sdb3
[    3.769649] sd 4:0:0:0: [sdb] Attached SCSI disk
[    3.770289] usb 1-3: New USB device found, idVendor=04d9, idProduct=a070
[    3.770365] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.770436] usb 1-3: Product: USB Gaming Mouse
[    3.770498] usb 1-3: Manufacturer: Holtek
[    3.772014] hidraw: raw HID events driver (C) Jiri Kosina
[    3.780433] usbcore: registered new interface driver usbhid
[    3.780503] usbhid: USB HID core driver
[    3.781095] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04D9:A070.0001/input/input1
[    3.835986] holtek_mouse 0003:04D9:A070.0001: input,hidraw0: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:00:14.0-3/input0
[    3.836328] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:04D9:A070.0002/input/input2
[    3.892054] holtek_mouse 0003:04D9:A070.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Holtek USB Gaming Mouse] on usb-0000:00:14.0-3/input1
[    3.892533] holtek_mouse 0003:04D9:A070.0003: hiddev0,hidraw2: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:00:14.0-3/input2
[    3.935957] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    3.951943] tsc: Refined TSC clocksource calibration: 2394.455 MHz
[    4.065452] usb 1-10: New USB device found, idVendor=06cb, idProduct=2970
[    4.065520] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.065599] usb 1-10: Product:  
[    4.065657] usb 1-10: Manufacturer:  
[    4.065829] usb 1-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[    4.230725] ntfs: driver 2.1.31 [Flags: R/W MODULE].
[    4.241696] ntfs: volume version 3.1.
[    4.241760] ntfs: (device sda1): load_system_files(): Volume is dirty.  Will not be able to remount read-write.  Run chkdsk and mount in Windows.
[    4.356239] usb 1-13: new full-speed USB device number 5 using xhci_hcd
[    4.377844] ntfs: volume version 3.1.
[    4.377904] ntfs: (device sdb1): load_system_files(): Volume is dirty.  Will not be able to remount read-write.  Run chkdsk and mount in Windows.
[    4.469689] scsi 5:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
[    4.470064] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    4.470892] sd 5:0:0:0: [sdc] 30515200 512-byte logical blocks: (15.6 GB/14.5 GiB)
[    4.472321] sd 5:0:0:0: [sdc] Write Protect is off
[    4.472384] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
[    4.473741] sd 5:0:0:0: [sdc] No Caching mode page found
[    4.473802] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[    4.480925]  sdc: sdc1 sdc2
[    4.484851] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[    4.485967] usb 1-13: New USB device found, idVendor=04ca, idProduct=2009
[    4.486034] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.486114] usb 1-13: Product: BCM43142A0
[    4.486174] usb 1-13: Manufacturer: Broadcom Corp
[    4.486235] usb 1-13: SerialNumber: 3010B390CC0B
[    4.571156] ntfs: volume version 3.1.
[    4.571219] ntfs: (device sdb2): load_system_files(): Volume is dirty.  Will not be able to remount read-write.  Run chkdsk and mount in Windows.
[    4.622590] ntfs: (device sdb2): load_system_files(): Windows is hibernated.  Will not be able to remount read-write.  Run chkdsk.
[    4.652468] usb 1-14: new high-speed USB device number 6 using xhci_hcd
[    4.833841] random: nonblocking pool is initialized
[    4.834615] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[    4.894045] usb 1-14: New USB device found, idVendor=04f2, idProduct=b455
[    4.894113] usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.894193] usb 1-14: Product: HD WebCam
[    4.894251] usb 1-14: Manufacturer: SunplusIT INC.
[    4.952869] Switched to clocksource tsc
[    5.044415] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
[    6.246942] ISO 9660 Extensions: Microsoft Joliet Level 3
[    6.250543] ISO 9660 Extensions: RRIP_1991A
[    6.257943] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[    6.258849] aufs 4.0-20150525
[    6.266058] loop: module loaded
[    6.353262] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    6.371201] uhci_hcd: USB Universal Host Controller Interface driver
[    6.372852] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   12.069807] device-mapper: uevent: version 1.0.3
[   12.069926] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
[   12.094736] ntfs: volume version 3.1.
[   12.094800] ntfs: (device sda1): load_system_files(): Volume is dirty.  Mounting read-only.  Run chkdsk and mount in Windows.
[   12.365540] ntfs: volume version 3.1.
[   12.365604] ntfs: (device sdb1): load_system_files(): Volume is dirty.  Mounting read-only.  Run chkdsk and mount in Windows.
[   12.780466] ntfs: volume version 3.1.
[   12.780530] ntfs: (device sdb2): load_system_files(): Volume is dirty.  Mounting read-only.  Run chkdsk and mount in Windows.
[   12.831904] ntfs: (device sdb2): load_system_files(): Windows is hibernated.  Will not be able to remount read-write.  Run chkdsk.
[   13.166061] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[   13.586057] EXT4-fs (sdb): warning: mounting fs with errors, running e2fsck is recommended
[   13.586402] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
[   13.934267] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   15.789108] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[   15.789318] systemd[1]: Detected architecture 'x86-64'.
[   15.902217] systemd[1]: Inserted module 'autofs4'
[   15.914522] systemd[1]: Set hostname to <localhost.localdomain>.
[   15.914929] systemd[1]: Initializing machine ID from random generator.
[   16.115370] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   16.115505] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   16.115592] systemd[1]: Starting Remote File Systems (Pre).
[   16.115953] systemd[1]: Reached target Remote File Systems (Pre).
[   16.116030] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[   16.116134] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   16.116219] systemd[1]: Starting Paths.
[   16.116542] systemd[1]: Reached target Paths.
[   16.116622] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[   16.117035] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   16.117128] systemd[1]: Starting Swap.
[   16.117449] systemd[1]: Reached target Swap.
[   16.117515] systemd[1]: Starting Root Slice.
[   16.117879] systemd[1]: Created slice Root Slice.
[   16.117946] systemd[1]: Starting User and Session Slice.
[   16.118297] systemd[1]: Created slice User and Session Slice.
[   16.118366] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   16.118720] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   16.118790] systemd[1]: Starting Delayed Shutdown Socket.
[   16.119128] systemd[1]: Listening on Delayed Shutdown Socket.
[   16.119196] systemd[1]: Starting Journal Socket (/dev/log).
[   16.119540] systemd[1]: Listening on Journal Socket (/dev/log).
[   16.119609] systemd[1]: Starting LVM2 metadata daemon socket.
[   16.119951] systemd[1]: Listening on LVM2 metadata daemon socket.
[   16.120021] systemd[1]: Starting Device-mapper event daemon FIFOs.
[   16.120646] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   16.120719] systemd[1]: Starting udev Control Socket.
[   16.121056] systemd[1]: Listening on udev Control Socket.
[   16.121127] systemd[1]: Starting udev Kernel Socket.
[   16.121461] systemd[1]: Listening on udev Kernel Socket.
[   16.121531] systemd[1]: Starting Journal Socket.
[   16.121877] systemd[1]: Listening on Journal Socket.
[   16.121950] systemd[1]: Starting System Slice.
[   16.122299] systemd[1]: Created slice System Slice.
[   16.122369] systemd[1]: Starting system-getty.slice.
[   16.122724] systemd[1]: Created slice system-getty.slice.
[   16.122803] systemd[1]: Starting Increase datagram queue length...
[   16.123336] systemd[1]: Mounting Huge Pages File System...
[   16.123951] systemd[1]: Mounting POSIX Message Queue File System...
[   16.124576] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   16.125167] systemd[1]: Mounting Debug File System...
[   16.167145] systemd[1]: Started Set Up Additional Binary Formats.
[   16.169555] systemd[1]: Starting Load Kernel Modules...
[   16.170155] systemd[1]: Starting udev Coldplug all Devices...
[   16.170762] systemd[1]: Starting live-config contains the components that configure a live system during the boot process (late userspace)....
[   16.171384] systemd[1]: Starting LSB: NFS support files common to client and server...
[   16.172093] systemd[1]: Starting Slices.
[   16.172443] systemd[1]: Reached target Slices.
[   16.173510] systemd[1]: Mounted Debug File System.
[   16.174709] systemd[1]: Mounted POSIX Message Queue File System.
[   16.175050] systemd[1]: Mounted Huge Pages File System.
[   16.180852] systemd[1]: Started Increase datagram queue length.
[   16.181574] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   16.182292] systemd[1]: Starting Create Static Device Nodes in /dev...
[   16.182936] systemd[1]: Starting Syslog Socket.
[   16.183315] systemd[1]: Listening on Syslog Socket.
[   16.183403] systemd[1]: Starting Journal Service...
[   16.184377] systemd[1]: Started Journal Service.
[   16.368082] fuse init (API version 7.23)
[   19.494874] systemd-udevd[1166]: starting version 215
[   19.780865] wmi: Mapper loaded
[   19.889408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   19.920399] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3
[   19.920535] ACPI: Lid Switch [LID0]
[   19.920658] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input4
[   19.920748] ACPI: Power Button [PWRB]
[   19.920905] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input5
[   19.920994] ACPI: Sleep Button [SLPB]
[   19.921130] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   19.921212] ACPI: Power Button [PWRF]
[   19.921617] ACPI: AC Adapter [ACAD] (on-line)
[   19.922063] EDAC MC: Ver: 3.0.0
[   19.923417] ACPI Warning: SystemIO range 0x0000000000005040-0x000000000000505F conflicts with OpRegion 0x0000000000005040-0x000000000000504F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
[   19.923606] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.953103] [Firmware Bug]: battery: (dis)charge rate invalid.
[   19.953210] ACPI: Battery Slot [BAT1] (battery present)
[   19.953855] EDAC ie31200: No ECC support
[   20.013387] bcma: bus0: Found chip with id 43142, rev 0x01 and package 0x08
[   20.013485] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0)
[   20.013590] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0)
[   20.013716] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0)
[   20.013852] bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0)
[   20.030954] bcma: bus0: Bus registered
[   20.047866] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   20.172052] [drm] Initialized drm 1.1.0 20060810
[   20.191622] alg: No test for crc32 (crc32-pclmul)
[   20.381814] input:     UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:06CB:2970.0004/input/input8
[   20.382074] hid-multitouch 0003:06CB:2970.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [   ] on usb-0000:00:14.0-10/input0
[   20.498797] sound hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) typeConfusedpeaker
[   20.498887] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.498953] sound hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   20.499017] sound hdaudioC1D0:    mono: mono_out=0x0
[   20.499079] sound hdaudioC1D0:    inputs:
[   20.499140] sound hdaudioC1D0:      Mic=0x12
[   20.542149] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[   20.577035] Bluetooth: Core ver 2.20
[   20.577111] NET: Registered protocol family 31
[   20.577173] Bluetooth: HCI device and connection manager initialized
[   20.577240] Bluetooth: HCI socket layer initialized
[   20.577313] Bluetooth: L2CAP socket layer initialized
[   20.577381] Bluetooth: SCO socket layer initialized
[   20.698050] usbcore: registered new interface driver btusb
[   20.701911] iTCO_vendor_support: vendor-support=0
[   20.702982] bluetooth hci0: firmware: failed to load brcm/BCM43142A0-04ca-2009.hcd (-2)
[   20.703065] bluetooth hci0: Direct firmware load for brcm/BCM43142A0-04ca-2009.hcd failed with error -2
[   20.703151] Bluetooth: hci0: BCM: patch brcm/BCM43142A0-04ca-2009.hcd not found
[   20.703400] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   20.703499] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[   20.703678] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   20.720106] [drm] Memory usable by graphics device = 2048M
[   20.720171] [drm] Replacing VGA console driver
[   20.720810] Console: switching to colour dummy device 80x25
[   20.742378] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   20.742387] [drm] Driver supports precise vblank timestamp query.
[   20.742522] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   20.745558] media: Linux media interface: v0.10
[   20.764106] acer_wmi: Acer Laptop ACPI-WMI Extras
[   20.764125] acer_wmi: Function bitmap for Communication Button: 0x801
[   20.764281] acer_wmi: Brightness must be controlled by acpi video driver
[   20.779900] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[   20.779978] input: Acer WMI hotkeys as /devices/virtual/input/input11
[   20.781617] input: Acer BMA150 accelerometer as /devices/virtual/input/input12
[   20.825951] Linux video capture interface: v2.00
[   20.866341] intel_rapl: Found RAPL domain package
[   20.866351] intel_rapl: Found RAPL domain core
[   20.866356] intel_rapl: Found RAPL domain uncore
[   20.866360] intel_rapl: Found RAPL domain dram
[   20.882509] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b455)
[   20.886895] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[   20.886948] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[   20.887071] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[   20.887096] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[   20.887131] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[   20.887236] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[   20.887241] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[   20.887280] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[   20.891118] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/input/input13
[   20.891187] usbcore: registered new interface driver uvcvideo
[   20.891190] USB Video Class driver (1.1.1)
[   20.986322] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   20.986674] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   20.986681] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[   20.986689] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88015a8e15b8), AE_NOT_FOUND (20150204/psparse-536)
[   20.986744] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input14
[   20.988356] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   20.988460] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[   20.988564] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   20.988576] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
[   20.988798] nouveau ![  DEVICE][0000:01:00.0] unknown Maxwell chipset
[   20.988806] nouveau E[  DEVICE][0000:01:00.0] unknown chipset, 0x118010a2
[   20.988812] nouveau E[     DRM] failed to create 0x00000080, -22
[   20.989171] nouveau: probe of 0000:01:00.0 failed with error -22
[   21.003080] fbcon: inteldrmfb (fb0) is primary device
[   22.003940] Console: switching to colour frame buffer device 170x48
[   22.006159] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   22.006180] i915 0000:00:02.0: registered panic notifier
[   22.032325] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[   22.032454] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[   22.032532] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[   22.707080] Bluetooth: hci0 command 0x1003 tx timeout
[   26.916218] systemd-journald[990]: Received request to flush runtime journal from PID 1
[   27.731775] Netfilter messages via NETLINK v0.30.
[   29.401599] cfg80211: Calling CRDA to update world regulatory domain
[   29.489139] cfg80211: World regulatory domain updated:
[   29.490344] cfg80211:  DFS Master region: unset
[   29.490372] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   29.492687] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   29.493538] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   29.494762] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   29.495959] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   29.497166] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   29.498253] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   29.499329] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   29.500446] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   29.641226] r8169 0000:07:00.1: firmware: direct-loading firmware rtl_nic/rtl8411-2.fw
[   29.658802] r8169 0000:07:00.1 eth0: link down
[   29.658817] r8169 0000:07:00.1 eth0: link down
[   31.269040] r8169 0000:07:00.1 eth0: link up
[   46.822080] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  512.659747] mmc0: cannot verify signal voltage switch
[  513.054704] mmc0: error -110 whilst initialising SD card
[  514.147553] mmc0: error -110 whilst initialising SD card
[  515.236498] mmc0: error -110 whilst initialising SD card
Odpowiedz
#2
Zobacz czy DMDE wykrywa kartę z prawidłowym rozmiarem. Jesli nie to niestety tylko lab.
 Gdyby Java miała prawdziwy garbage collector to programy kasowałyby się podczas uruchomienia.

Odpowiedz
#3
wgl nie wykrywa, lab to znaczy ? ze wymiana kontrolera ?
Odpowiedz
#4
Nie wymienia się kontrolerów w kartach. Wlut w ścieżki prowadzące do pamięci nand (bo kontroler jest uszkodzony) i zewnętrzny czytnik. Nie do wykonania w domowych warunkach i bez wykształcenia. Kontrolery wymienia się w innych rodzajach pamięci, ale i tu nie zawsze. Priorytetem jest odzyskanie danych a nie funkcjonalności urządzenia, więc jeśli da się sczytać dane np. chip-offem to robi się to właśnie w ten sposób. Podmiana elektroniki jest trudna, zwłaszcza w dyskach twardych ale to temat na dłuuuuuuuuugi post.

Kto Ci to zrobi? Krollontrack, datalab etc. Tanio nie będzie. Dlatego backup backup backup.
 Gdyby Java miała prawdziwy garbage collector to programy kasowałyby się podczas uruchomienia.

Odpowiedz


Podobne wątki
Wątek: Autor Odpowiedzi: Wyświetleń: Ostatni post
  karta micro sd programistacpp 23 3,905 01-26-2014, 20:20
Ostatni post: GL0BUS
  Karta Realtek nie łączy się z routerem. Xenovious 4 1,634 01-15-2014, 16:36
Ostatni post: m0ses
Exclamation Bezprzewodowa karta wifi nie działa na Backtrack Extreme 3. HerB3 12 3,226 04-12-2013, 19:09
Ostatni post: shogun
  Laptop - wewnętrzna karta + zewnętrzna antena. unknownexist 6 1,871 03-17-2013, 13:20
Ostatni post: unknownexist
  Backtrack 5 karta wifi nie działa toxic338 1 975 02-23-2013, 12:42
Ostatni post: Tommy
  karta wlan usb aquip niemiecka a backtrack / ubuntu killerro 6 1,305 01-18-2013, 16:46
Ostatni post: Tommy
  Karta sieciowa RtHM 4 1,195 12-25-2012, 22:56
Ostatni post: Tommy
  Karta sieciowa na usb ze sterami na wn7 grzeh2000 10 1,963 11-12-2012, 0:34
Ostatni post: jackkk
  karta sieciowa intel advanced-n 6235 slotki 12 2,621 11-05-2012, 22:30
Ostatni post: slotki
Sad BT5R3 i karta sieciowa Atheros AR9285 Adrix 2 1,274 10-10-2012, 10:23
Ostatni post: Adrix

Skocz do:


Użytkownicy przeglądający ten wątek: 1 gości
stat4u