Ocena wątku:
  • 1 głosów - średnia: 4
  • 1
  • 2
  • 3
  • 4
  • 5
botowalny pendrive ?
#11
Welcome - Parted Magic (Linux 3.4.6-pmagic)

root@PartedMagic:~# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 222G 125G 97G 57% /media/sda5-ata-SAMSUNG_HD502IJ_
/dev/sda1 245G 80G 165G 33% /media/sda1-ata-SAMSUNG_HD502IJ_
root@PartedMagic:~# smartctl -a /dev/sda1
smartctl 5.43 2012-06-30 r3573 [i686-linux-3.4.6-pmagic] (local build)
Copyright © 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD502IJ
Serial Number: S13TJ90QB21725
LU WWN Device Id: 5 0000f0 00b2b7152
Firmware Version: 1AA01113
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Mon Sep 3 16:03:46 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6682) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 13) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 085 085 011 Pre-fail Always - 5500
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3040
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 10343
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 65
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 2917
13 Read_Soft_Error_Rate 0x000e 100 099 000 Old_age Always - 0
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 23
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 071 060 000 Old_age Always - 29 (Min/Max 16/29)
194 Temperature_Celsius 0x0022 068 058 000 Old_age Always - 32 (Min/Max 16/32)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 6219562
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 116
200 Multi_Zone_Error_Rate 0x000a 100 099 000 Old_age Always - 32
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@PartedMagic:~#

z gory przepraszam ze wrzucam to w calosci a nie w txt, ale jak wkleje to do txt to wtedy sie caly tekst rozjezdza i nic nie jest czytelne. Nie czyscilem jeszcze dysku, to jest ta pierwsza komenda ktora mi podales Tommy. da sie z tego cos odczytac?

PS. zamiast tej komendy ddrescue mozna uzyc tego programu? ( zalaczam fotke z screenie )     . Jezeli tak to ktora opcje z tych pokazanych wybrac?
#12
Ten dysk jest w przyzwoitym stanie, dziwi mnie tylko że ma 3 uncorectable... ponieważ nie ma innych błędów, log pusty.
Jak nie chcesz żeby cykał wpisz hdparm -B255 -S255 /dev/sda

Ten program to GUI dla dd więc wybierz pierwszą opcje i masz to samo.
#13
dziekiSmile tzn zrobiłem smarta z poleceniem dev/sda1 , czyli tej partycji na ktorej mam Windows . czy to jest w porzadku? bo jak wpisywalem /dev/sda to nie chcialo wykonać , tzn nic sie nie dzialo
#14
smart jest na cały dysk a nie partycje, program sam wywalił 1.
#15
ok dzieki za wszystko, zabieram sie do ddrescue i stawiania swiezego systemuSmile

a co robi ta komenda hdparm -B255 -S255 /dev/sda ? myslisz ze to pomoze na to cykanie?

Tommy mam odpalone od 2 godzin tą komende co na screenie i tak cały czas stoi... dodam ze jak dotykam dysku to jest cieply . załączam screena :     . czy moze sie tak dziac?
#16
Stoi ? 90Mb/s to niezły wynik.
#17
Ok, zostawiłem na noc i rano przychodze i jest coś takiego:     . Czy to oznacza ze zerowanie sie powiodło?
#18
Nie, dysk ci się skończył. Został w całości wyzerowany... No space left on device = Nothing to do Smile
Błędów brak.

Sprawdź czy po zerowaniu nie odnalazło się kilka bad sectorów w SMART.
#19
root@PartedMagic:~# smartctl -a /dev/sda1
smartctl 5.43 2012-06-30 r3573 [i686-linux-3.4.6-pmagic] (local build)
Copyright © 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD502IJ
Serial Number: S13TJ90QB21725
LU WWN Device Id: 5 0000f0 00b2b7152
Firmware Version: 1AA01113
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Tue Sep 4 19:11:58 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6682) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 13) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 085 085 011 Pre-fail Always - 5480
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3043
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 9852
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 10364
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 65
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 2920
13 Read_Soft_Error_Rate 0x000e 100 099 000 Old_age Always - 0
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 23
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 067 060 000 Old_age Always - 33 (Min/Max 17/33)
194 Temperature_Celsius 0x0022 069 058 000 Old_age Always - 31 (Min/Max 17/34)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 3685846
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 116
200 Multi_Zone_Error_Rate 0x000a 100 099 000 Old_age Always - 32
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 10343 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@PartedMagic:~#

Wrzucam smart-a po zerowaniu dysku oraz Instalacji na nim Windows 7. Tommy czy zmienilo sie cos?
#20
Nie widzę wykonanego SMART self-test-u.... ale dysk nie odkrył nic złego po zerowaniu więc możesz spokojnie go używać.


Podobne wątki
Wątek: Autor Odpowiedzi: Wyświetleń: Ostatni post
  Jaki pendrive dla bactrack Początek_końca 2 591 09-04-2012, 13:54
Ostatni post: Heron

Skocz do:


Użytkownicy przeglądający ten wątek: 1 gości
stat4u